Latest news

01 July 2010
New food approved coating: Accotron P449
It is with great contentment that Accoat is able to present a new corrosion protective coating, which meets the European and American food standards.

17 May 2010
Accoat thanks for the visits at our booth at the Offshore Technology Conference
The total of visitors amounted to 72.900 at the Reliant Park in Houston where OTC was held. Once more the top issues for Accoat at OTC was downhole production tubing and the coating StreaMax™

02 April 2010
Accoats thanks for the attention at NACE Corrosion 2010 in San Antonio in Texas
It was the third time that Accoat was present at NACE and again the much discussed topic was Downhole Production Tubing

19 March 2010
Accoat is used as a model for energy optimization by the company Buhl and Bønsøe
After the introduction of dataloggers in the production hall, great savings in regards energy are achieved

27 January 2010
Transporting CO2: Launch of the European COCATE project led by IFP
Accoat’s role in the COCATE project, under the European Frame Program 7 (FP7), is to develop technologies that will prevent steel pipes from corroding during CO2 transport

18 December 2009
Bright Green
Accoat showcased its surface solutions within the field of sustainable coatings solutions at Bright Green in Copenhagen, the parallel event to COP15

10 November 2009
Energy-saving coatings
More press on Accoats coatings. This time from the magazine Teknovation

06 October 2009
When coatings reduce the strain on the environment
Read the article about Accoats’ coatings that the Danish Industrial Business organisation (DI) brings in their business magazine nr. 31

23 September 2009
Eurocorr 09: View this years poster from Accoat
Accoat would like to say thanks for the paid visits at Eurocorr 09.

18 September 2009
Offshore Europe: A vibrant exhibition in Aberdeen, Scotland this year
The top issue for Accoat at Offshore Europe was Downhole Production Tubing.

26 June 2009
SP Group is part of ground-breaking research project RadiSurf at Aarhus University
The aim of RadiSurf is to develop methods to generate strong chemical bonds between polymer coatings and carious surfaces.

20 May 2009
Accoat would like to thank the visitors at Houston’s Offshore Technology Conference
Accoat had the pleasure to present visitors to our brand new product from DuPont™ named StreaMax™

13 May 2009
The Danish Newspaper ' Frederiksborg Amts Avis' the 12th of May: ISO 14001 is the environmentally conscious son
Read the article about Accoat being at the forefront in regards the environment. Already 10 years ago Accoat was certified ISO 140001.

22 April 2009
European Coating Show: Accoat’s dynamic booth aroused great attention
The sales crew of Accoat put on their working clothes - literally speaking - at the European Coating Show targeted to producers of varnish and paint.

26 March 2009
Great interest in Accoat’s Key focuses at NACE Corrosion 2009
Especially one subject has been of high interest for a vast mass of people (read companies) and that is Downhole Production Tubing.

18 February 2009
The Danish Newspaper for Engineers 'Ingeniøren' the 13th of February: Ceramic Coating to Knock Teflon out of the Pan
Read the article about Accoat's scientific research in regards ceramic materials.

16 January 2009
The Danish Newspaper for engineers ’Ingeniøren’ the 16th of January: Materials for extreme environments gives competitive advantages
Read the article from ‘Ingeniøren’ about SP Groups contribution to the development of extreme materials.

16 January 2009
Danish Business Paper ’Børsen’ 15th of January: Danish company (Accoat) is firstmover on future coatings for frying equipment
Read Børsen’s article about Accoat’s research on new ceramic surfaces for industrial food frying.

19 December 2008
Saranya Ashokkumar, Industrial PhD student at Accoat, wins the DTU’s PhD Challenge Competition, which is part of Venture Cup 08
Venture Cup is a business plan competition for students and researchers at Danish universities with a total of DKK 650.000 in cash prizes.

24 November 2008
What EU’s new law REACH implicates for Accoat
Accoat’s customers will not have to take any actions in relation to REACH when purchasing surface solutions from Accoat.

29 October 2008
Accoat qualifies to the Achilles Joint Qualification System
The Joint Qualification System, more known as JQS, is used by some of the worlds most important oil companies and contractors.

07 October 2008
View Accoat’s latest poster given at Eurocorr - the European Corrosion Congress
During Eurocorr Accoat presented the poster ”Fluoroplastic coatings for corrosion protection, low friction and non-stick” at the poster party held on Monday.

01 August 2008
Accoat brings the Eastern and Central European coating markets into focus
Already at the beginning of 2008 the management decided to extend the sales forces at Accoat, thereby conforming to Accoat’s vision to be a leading supplier in Europe in its line of business by being the preferred choice of the customers within Accoats’ core competences.

18 July 2008
Global presence
Accoat is present all over the world at the foremost exhibitions on oil and gas.

20 June 2008
Accoat invited by DuPont to join them at The Oil and Gas exhibition Neftegaz 2008
Neftegaz is one of the largest exhibitions in the sphere of the oil and gas industries.

16 June 2008
Accoat meets customers’ demands – investment in zinc phosphating facility
As rapid development, innovation, and high-quality services in the fields of Oil and Gas sectors are the constant demands of this market, Accoat endeavours to be at the forefront of change.

30 May 2008
Accoat invited to Stockholm, Scandinavian Venice to visit the tradefair SPCI 2008
From the 27th – 29th of May Accoat’s area manager Steen Lindstrøm guested one of the worlds largest tradefairs for the Pulp and Paper Industry: SPCI 2008, World Pulp and Paper week.

23 May 2008
View our latest brochure
Do not miss out on Accoat's new brochure.

16 May 2008
Exciting days at OTC Technology Conference, Houston, Texas
Quite an adventure being at OTC - the worlds foremost event for the development of offshore resources in the fields of drilling, exploration, production, and environmental protection.

30 April 2008
The new shot blasting machine is working
After a month with intensive work the shot blasting machine is running.

21 April 2008
Accoat participates in the WTG
Global Refining Summit 21st – 23rd April 2008, Barcelona, Spain

31 March 2008
NEW developed coating
Accoats councelling and information is based on research and many years experience...

19 March 2008
See Accoats NEW offshore brochure
Accoat has finally published a NEW offshore brochure and there are more to come later...

14 March 2008
Accoat introducing NEW DATASHEETS
Read more about Accoat´s standard coatings...